Investigation and fabrication triboelectric nanogenerator using commercial Polytetrafluoroethylene and Aluminum

Authors

  • Hai Phan*
  • Nguyen Hoa Phan
  • Anh Tam Ho, Huu Duc Nguyen
  • Duc Thang Pham

Keywords:

Aluminum, contact separation mode, PTFE, triboelectric nanogenerator

Abstract

Triboelectric nanogenerator (TENG) is an energy technology that can convert mechanical energy into electricity based on the conjunction of triboelectric friction and electrostatic induction. TENG possesses a high potential as an alternative artificial energy source to develop the integrated power source device, active sensor, or massive scale power source. In this research, the vertical contact triboelectric nanogenerators using commercial grade Polytetrafluoroethylene (PTFE) and Aluminum were successfully fabricated. It performs the output voltage and current of 145 V and 8.5 µA, respectively. Moreover, the maximum power of 510 µW was observed at the external contact force of 11 N.

DOI:

https://doi.org/10.31276/VJST.64(3).32-36

Classification number

2.2

Author Biographies

Hai Phan*

Faculty of Engineering Physics and Nanotechnology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Key Laboratory for Micro and Nano Technology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Nguyen Hoa Phan

Faculty of Engineering Physics and Nanotechnology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Anh Tam Ho, Huu Duc Nguyen

Key Laboratory for Micro and Nano Technology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Duc Thang Pham

Faculty of Engineering Physics and Nanotechnology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Key Laboratory for Micro and Nano Technology, University of Engineering and Technology, Vietnam National University, Hanoi, 144 Xuan Thuy Street, Dich Vong Hau Ward, Cau Giay District, Hanoi, Vietnam

Downloads

Published

2022-03-25

Received 6 September 2021; accepted 11 October 2021

How to Cite

Phan Hai*, Phan Nguyen Hoa, Ho Anh Tam, Nguyen Huu Duc, & Pham Duc Thang. (2022). Investigation and fabrication triboelectric nanogenerator using commercial Polytetrafluoroethylene and Aluminum. Version B of Vietnam Journal of Science and Technology, 64(3). https://doi.org/10.31276/VJST.64(3).32-36

Issue

Vol. 64 No. 3 (2022): Vol 64 - Number 3 - March - 2022

Section

Engineering and Technology